Installation Guide

STEP 15
1. Attach upper back board (9), middle back board (10) and lower back board (11) to back of cabinet by
inserting 24 screws (L) through holes on upper back board (9), middle back board (10) and lower back
board (11), then tighten to back of cabinet.
STEP 16
1. Place drawing with hole position on wall in desired position and drill holes on wall.
2. Insert 2 plastic anchors (R) into holes on wall.
3. Attach cabinet in place with holes, then insert screws (T) through holes on brackets (P) and tighten to
plastic anchors (R) in wall.