Installation Guide
STEP 13
1. Attach 4 metal legs (12) to bottom board (6) by inserting 8 screws (E) through holes on shims (F), then
through holes on metal legs (12) and tighten to bottom board (6).
STEP 14
1. Attach top board (1) to left side panel (7), right side panel (8) and divider board (2) by inserting cam
bolts into cam lock holes on left side panel (7), right side panel (8) and divider board (2).
2. Insert 6 cam locks (B) into cam lock holes on left side panel (7), right side panel (8) and divider board (2),
then rotate clockwise to secure cam bolts in place.