Installation Guide

1. Insert 8 wood dowels (D) into wood dowel holes on middle connection board (6).

2. Attach upper assembled unit to lower assembled unit by inserting wood dowels (D) into wood

dowel holes and inserting cam bolts (A) into cam lock holes on lower left side frame (7), lower

right side frame (8) and middle cross bars (9).

3. Insert 2 cam locks (B) into cam lock holes on lower left side frame (7) and lower right side

frame (8), then rotate clockwise to secure cam bolts in place.

1. Attach upper back board (13), middle back board (14) and lower back board (15) together

by sliding into plastic connection strips (12).

2. Attach upper back board (13), middle back board (14) and lower back board (15) to the

cabinet by inserting 20 screws (M) through holes on back boards (13, 14 and 15), then tighten

to cabinet.

STEP 9

STEP 10

Mx20