Installation Guide

STEP 12

Option #1: Securing to Drywall

1. Position Spacesaver against wall in desired location. Using a pencil, make 2 small marks on

wall through holes on brackets (R). Move cabinet away from wall and screw 2 plastic anchors (S)

into wall on pencil marks.

2. Place cabinet against wall, insert 2 screws (T) through holes on brackets (R), then tighten to

plastic anchors (S).

Option #2: Securing to Drywall and Wood Stud

1. Position spacesaver against wall in desired location. Insert 2 screws (T) through holes on

brackets (R), then tighten through drywall and into wood stud.

*Tip: Anchor brackets (R) can be adjusted to correct distance from wall to cabinet as needed.

Once adjusted, be sure to re-tighten brackets inside cabinet for stability.

DRYWALL

WALL ANCHOR

WITH SCREW

OPTION #1

SCREW

ONLY

DRYWALL

OPTION #2

WOOD

STUD