Installation Guide

STEP 6
1. Attach 2 hinges (E) to door (8) by inserting 4 screws (G) through holes on hinges, then
tighten to door (8).
2. Attach handle (F) to door (8) by inserting 2 screws (N) through holes on handle (F), then
tighten to door (8).
3. Stick 1 silicon pad (M) on handle (F) to prevent scratches on shelf edge when door is
closed.
STEP 7
1. Attach door (8) to cabinet by inserting 8 screws (G) through holes on hinges, then tighten to
right side panel (4).
2. Note: Tightening screw in position “a” will adjust door up or down; tightening screw in
position “b” will adjust door to or from cabinet and tightening screw in position “c” will adjust
door side to side.
Door Adjustments