Installation Guide

STEP 1
1. Screw 4 cam bolts (A) into cam bolt holes on top board (1).
2. Attach bracket (I) to shelf (6) by inserting 1 screw (H) through hole on bracket (I), then
tighten to shelf (6).
STEP 2
1. Screw 4 cam bolts (A) into cam bolt holes on left side panel (3).
2. Screw 4 cam bolts (A) into cam bolt holes on right side panel (4).
STEP 3
1. Insert 6 wood dowels (C) into wood dowel holes on left side panel (3).
2. Attach left side panel (3) to cross bar (5), shelf (6) and bottom board (2) by inserting wood
dowels (C) into wood dowel holes on cross bar (5) and inserting cam bolts (A) into cam lock
holes on shelf (6) and bottom board (2).
3. Insert 4 cam locks (B) into cam lock holes on shelf (6) and bottom board (2) then rotate
clockwise to secure cam bolts in place.
4. Repeat above steps to assemble right side panel (4) to cross bar (5), shelf (6) and bottom
board (2).