Installation Guide

ManualsBrandsRiverRidge Home ManualsBathBayfield 30 in. W 2-Door Floor Cabinet in White

ASSEMBLY INSTRUCTIONS

ADULT ASSEMBLY REQUIRED

WARNING

SEE FULL WARNING ON PAGE 2

ITEM #: 06-114 White

RiverRidge

Bayfield Two-Door Floor Cabinet

This product requires assembly by an adult because of small parts. Care should be taken in

unpacking and assembling this item to keep small parts away from children.

Young children can be seriously injured or killed if furniture tips over.

Don’t use this item for a TV stand or place heavy objects on top of item.

Always use angle-braces or anchors to secure furniture to the wall.

Summary of content (11 pages)

PAGE 1
ASSEMBLY INSTRUCTIONS RiverRidge® Bayfield Two-Door Floor Cabinet ITEM #: 06-114 White ADULT ASSEMBLY REQUIRED This product requires assembly by an adult because of small parts. Care should be taken in unpacking and assembling this item to keep small parts away from children. WARNING SEE FULL WARNING ON PAGE 2 Young children can be seriously injured or killed if furniture tips over. Don’t use this item for a TV stand or place heavy objects on top of item.
PAGE 2
THIS SHELF UNIT WILL HOLD UP TO 20 POUNDS PER SHELF OR TOP BOARD FOR A TOTAL OF 80 POUNDS. DO NOT LOAD EACH SHELF WITH MORE THAN 20 POUNDS OR 80 POUNDS TOTAL WEIGHT. IF OVERLOADED WITH MORE THAN 20 POUNDS PER SHELF OR 80 POUNDS TOTAL WEIGHT, SHELF MAY TIP FROM THE WALL AND CAUSE SERIOUS INJURY OR DEATH.
PAGE 3
1 4 9 3 5 10 2 6 11 7 8 NO 1 2 3 4 5 6 7 8 9 10 11 QTY 1PC 1PC 1PC 1PC 1PC 1PC 1PC 1PC 1PC 1PC 2PCS DESCRIPTION Top Board Left Side Panel Right Side Panel Upper Cross Bar Adjustable Shelf Shelf Rear Lower Cross Bar Bottom Board Upper Back Board Lower Back Board Door 11
PAGE 4
A B C D E F G H I J K L M 12PCS Cam Bolt 12PCS Cam Lock 22PCS Wood Dowel (6 x 30mm) 4PCS Shelf Holder 4PCS Hinge 3PCS Screw (4 x 35mm) 16PCS Screw (4 x 12mm) 2PCS Screw (4 x 30mm) 2PCS Screw (4 x 12mm) 14PCS Screw (2.
PAGE 5
STEP 1 A A A A A A A A 2 3 1. Insert 4 cam bolts (A) into pre-threaded holes on left side panel (2). 2. Insert 4 cam bolts (A) into pre-threaded holes on right side panel (3). STEP 2 I L A A A I L I L A 1 1. Insert 4 cam bolts (A) into pre-threaded holes on top board (1). 2. Attach 2 brackets (L) to top board (1) by inserting 2 screws (I) through holes on brackets (L), then tighten to top board (1). STEP 3 8 C C 7 F F 1. Insert 2 wood dowels (C) into wood dowel holes on bottom board (8).
PAGE 6
STEP 4 G G E G G G G E E 11 x2 1. 2. Attach 2 hinges (E) to door (11) by inserting 4 screws (G) through holes on hinges (E), then tighten to door (11). Repeat this step to assemble 2 hinges (E) to another door (11). STEP 5 7 4 6 8 B C C C B C C B C 2 1. 2. 3. B C C Insert 7 wood dowels (C) into wood dowel holes on left side panel (2).
PAGE 7
3 STEP 6 C C C C B 4 B C C C 7 B B 6 8 2 1. Insert 7 wood dowels (C) into wood dowel holes on right side panel (3). 2. Attach right side panel (3) to upper cross bar (4), shelf (6), bottom board (8) and rear lower cross bar (7) by inserting wood dowels (C) into wood dowel holes and insert cam bolts (A) into cam lock holes on upper cross bar (4), shelf (6) and bottom board (8). 3.
PAGE 8
STEP 8 J J J J J J J J 9 10 J J J 9 M J J J 10 M 1. Slide 2 back boards into grooves on plastic connection strip (M). 2. Attach upper back board (9) and lower back board (10) to back of cabinet by inserting 14 screws (J) through holes on upper back board (9) and lower back board (10), then tighten to cabinet. STEP 9 D D D D 1. Insert 4 shelf holders (D) into desired position. 2. Place adjustable shelf (5) onto 4 shelf holders (D).
PAGE 9
STEP 10 E G G G×2 c G×2 G×2 a a b 11 b c 11 1. 2. Attach doors (11) to cabinet by inserting 8 screws (G) through holes on hinges (E), then tighten to left side panel (2) and right side panel (3). Note: Tightening screw in position “a” will adjust doors up or down; tightening screw in position “b” will adjust doors to or from cabinet, and tightening screw in position “c” will adjust doors side to side.
PAGE 10
STEP 11 K H K K H H OPTION #1 OPTION #2 DRYWALL DRYWALL H H WALL ANCHOR WITH SCREW K WOOD STUD SCREW ONLY Option #1: Securing to Drywall 1. Position cabinet against wall in desired location. Using a pencil, make 2 small marks on wall through holes on brackets (L). Move cabinet away from wall and screw 2 plastic anchors (K) into wall on pencil marks. 2. Place cabinet against wall, insert 2 screws (H) through holes on metal brackets (L), then tighten to plastic anchors (K).
PAGE 11
Enjoy your new RiverRidge ® Cabinet! Thank you for purchasing this RiverRidge® Home item. We hope you enjoy it and consider purchasing other RiverRidge® items. To order replacement parts at no cost to you, email customer.service@ssi- rr.com, call 1-(844)-223-5201 or order parts online at www.riverridgehome.com RiverRidge ® is a registered trademark of Sourcing Solutions, Inc.