Installation Guide

STEP 6
1. Attach 2 hinges (E) to left door (7) by inserting 4 screws (G) through holes on hinges (E),
then tighten to left door (7).
2. Attach handle (F) to left door (7) by inserting 2 screws (N) through holes on handle (F),
then tighten to left door (7).
3. Repeat above steps to assemble hinges (E) and handle (F) to right door (8).
STEP 7
1. Attach left door (7) to cabinet by inserting 8 screws (G) through holes on hinges (E) then
tighten to left side panel (3).
2. Attach right door (8) to cabinet by inserting 8 screws (G) through holes on hinges (E) then
tighten to right side panel (4).
*Note: Tightening screw in position “a” will adjust doors up or down; tightening screw in position “b” will
adjust doors to or from cabinet and tightening screw in position “c” will adjust doors side to side.
Door Adjustments