Installation Guide
STEP 4
1. Attach top board (1) to left side panel (3) and right side panel (4) by inserting cam bolts into
cam lock holes on left side panel (3) and right side panel (4).
2. Insert 4 cam locks (B) into cam lock holes on left side panel (3) and right side panel (4),
then rotate clockwise to secure cam bolts in place.
STEP 5
1. Attach upper back board (9) and lower back board (10) together by sliding into plastic
connection strip (H).
2. Attach upper back board (9) and lower back board (10) to cabinet by inserting 16 wood
screws (K) through holes on upper back board (9) and lower back board (10) then tighten
to cabinet.