Installation Guide

STEP 1
1. Screw 4 cam bolts (A) into cam bolt holes on top board (1).
2. Attach 2 brackets (J) to top board (1) by inserting 2 screws (I) through holes on bracket (J)
and tighten to top board (1).
STEP 2
1. Screw 2 cam bolts (A) into cam bolt holes on left side panel (3).
2. Screw 2 cam bolts (A) into cam bolt holes on right side panel (4).
STEP 3
1. Insert 4 wood dowels (C) into wood dowel holes on left side panel (3).
2. Attach left side panel (3) to cross bar (5) and bottom board (2) by inserting wood dowels
into wood dowel holes on cross bar (5) and inserting cam bolts and wood dowels into cam lock
holes and wood dowel holes on bottom board (2).
3. Insert 2 cam locks (B) into cam lock holes on bottom board (2) and rotate clockwise to
secure cam bolts in place.
4. Repeat above steps to assemble right side panel (4) to cross bar (5) and bottom board (2).