ASSEMBLY INSTRUCTIONS RiverRidge® Madison Tall Cabinet ITEM #: 06-108 White ADULT ASSEMBLY REQUIRED This product requires assembly by an adult because of small parts. Care should be taken in unpacking and assembling this item to keep small parts away from children. WARNING SEE FULL WARNING ON PAGE 2 Young children can be seriously injured or killed if furniture tips over. Don’t use this item for a TV stand or place heavy objects on top of item.
THIS SHELF UNIT WILL HOLD UP TO 20 POUNDS PER SHELF OR A TOTAL OF 120 POUNDS. DO NOT LOAD EACH SHELF WITH MORE THAN 20 POUNDS OR 120 POUNDS TOTAL WEIGHT. IF OVERLOADED WITH MORE THAN 20 POUNDS PER SHELF OR 120 POUNDS TOTAL WEIGHT, SHELF MAY TIP FROM THE WALL AND CAUSE SERIOUS INJURY OR DEATH.
PARTS LIST NO QTY DESCRIPTION 1 2 3 4 5 6 7 8 1PC 2PCS 1PC 1PC 1PC 1PC 1PC 1PC Top Board Upper Shelf Middle Connection Board Lower Shelf Lower Adjustable Shelf Bottom Board Upper Front Cross Bar Lower Cross Bar 9 10 2PCS 1PC Upper Side Frame Lower Left Side Panel 11 12 13 14 1PC 1PC 1PC 1PC Lower Right Side Panel Door Back Board Upper Back Cross Bar
NO PARTS LIST PARTS QTY DESCRIPTION A 24PCS Cam Bolt B C D E F 24PCS Cam Lock 32PCS Wood Dowel (6 x 30mm) 4PCS Metal Shelf Holder 2PCS Hinge 1PC Handle G H I J K 14PCS Screw (4 x 12mm) 2PCS Screw (5 x 45mm) 4PCS Screw (4 x 35mm) 14PCS Screw (2.
STEP 1 1. Screw 4 cam bolts (A) into pre-threaded holes on top board (1). 2. Screw 4 cam bolts (A) into pre-threaded holes on middle connection board (3). STEP 2 1. Screw 4 cam bolts (A) into pre-threaded holes on upper side frame (9). 2. Repeat above step for another upper side frame (9). STEP 3 1. Screw 4 cam bolts (A) into pre-threaded holes on lower left side panel (10). 2. Screw 4 cam bolts (A) into pre-threaded holes on lower right side panel (11).
STEP 4 1. Insert 8 wood dowels (C) into wood dowel holes on upper side frame (9). 2. Attach upper side frame (9) to upper front cross bar (7) and upper shelves (2) by inserting wood dowels (C) into wood dowel holes on upper front cross bar (7), upper back cross bar (14) and inserting cam bolts (A) into cam lock holes on upper shelves (2). 3. Insert 4 cam locks (B) into cam lock holes on upper shelves (2) then rotate clockwise to secure the cam bolts (A) in place. 4.
STEP 6 1. Insert 6 wood dowels (C) into wood dowel holes on lower left side panel (10). 2. Attach lower Left side panel (10) to lower cross bar (8), lower shelf (4) and bottom board (6) by inserting wood dowels (C) into wood dowel holes on lower cross bar (8) and inserting cam bolts and wood dowels into cam lock holes on lower shelf (4) and bottom board (6). 3. Insert 4 cam locks (B) into cam lock holes on lower shelf (4) and bottom board (6), then rotate clockwise to secure cam bolts in place. 4.
STEP 8 1. Attach back board (13) to cabinet by inserting 14 screws (J) through holes on back board (13), then tighten to back of cabinet. STEP 9 1. Attach 2 hinges (E) to door (12) by inserting 4 screws (G) through holes on hinges (E), then tighten to door (12). 2. Attach handle (F) to door (12) by inserting 2 screws (G) through holes on handle (F), then tighten to door (12).
STEP 10 Door Adjustments 1. Attach door (12) to cabinet by inserting 8 screws (G) through holes on hinges (E), then tighten to lower left side panel (10). 2. Note: Tightening screw in position “a” will adjust door up or down; tightening screw in position “b” will adjust door to or from cabinet and tightening screw in position “c” will adjust door side to side. STEP 11 1. Place drawing with hole positions on wall in desired location and drill holes on wall. 2.
STEP 12 1. Insert 4 metal holders (D) into holes at desired positions. 2. Place lower adjustable shelf (5) onto metal holders (D). ATTENTION ADULTS: Cabinet should be checked periodically for damage or loose screws/parts. Take appropriate action necessary to correct hazards such as tightening of screws and taking any damaged parts away from children. WARNING Please make sure your item is secured to the wall, per assembly instructions.
Enjoy your new RiverRidge® Cabinet! Thank you for purchasing this RiverRidge® Home item. We hope you enjoy it and consider purchasing other RiverRidge® items. To order replacement parts at no cost to you, email customer.service@ssi-rr.com, call 1-(844)-223-5201 or order parts online at www.riverridgehome.com RiverRidge® is a registered trademark of Sourcing Solutions, Inc.