Installation Guide

STEP 1
STEP 1
1. Screw 4 cam bolts (A) into pre-threaded holes on top board (1).
2. Attach magnet (D) to top board (1) by inserting 2 screws (E) through holes on magnet (D) and tighten
to top board (1).
3. Attach metal bracket (F) to top board (1) by inserting 1 screw (G) through hole on metal bracket (F)
and tighten to top board (1).
4. Screw 4 cam bolts (A) into pre-threaded holes on middle board (8).
STEP 2
STEP 2
1. Screw 2 cam bolts (A) into pre-threaded holes on upper left side panel (2).
2. Screw 2 cam bolts (A) into pre-threaded holes on upper right side panel (3).