Installation Guide

STEP 8
1. Attach pre-assembled upper unit to pre-assembled lower unit by inserting cam bolts (A) into
cam lock holes on lower left side panel (9) and lower right side panel (10) and inserting 4
cam locks (B) into cam lock holes and rotating clockwise to secure cam bolts in place.
2. Press 6 plastic caps (P) into holes on lower left side panel (9) and lower right side panel (10).
STEP 9
1. Insert 4 shelf holders (H) into holes on upper left side panel (2) and upper right side panel (3)
and make sure all 4 holders are on same level.