Installation Guide

STEP 4
1. Attach upper left side panel (2) to bottom shelf (7) by inserting cam bolts (A) into cam lock
holes on bottom shelf (7).
2. Insert 2 cam locks (B) into cam lock holes on bottom shelf (7) and rotate clockwise to secure
cam bolts in place.
3. Attach upper right side panel (3) to bottom shelf (7) by inserting cam bolts (A) into cam lock
holes on bottom shelf (7).
4. Insert 2 cam locks (B) into cam lock holes on bottom shelf (7) and rotate clockwise to secure
cam bolts in place.
STEP 5
1. Slide lower back board (13) into grooves on upper left side panel (2), upper right side panel
(3) and bottom shelf (7).
2. Insert 2 wood dowels (C) into dowel holes on upper left side panel (2) and upper right side
panel (3).
3. Attach middle board (8) to upper left side panel (2), upper right side panel (3) and lower back
board (13) by aligning groove on middle board (8) with lower back board (13) and inserting
wood dowels (C) into wood dowel holes on middle board (8).
4. Insert 4 screws (I) through holes on middle board (8) and tighten to upper left side panel (2)
and upper right side panel (3).
5. Slide upper back board (12) into grooves on upper left side panel (2), upper right side panel
(3) and bottom shelf (7).
6. Attach plastic connection strip (14) to upper back board (12) and slide another upper back
board (15) into grooves on upper left side panel (2), upper right side panel (3) and plastic
connection strip (14).