Installation Guide
STEP 1
1. Screw 4 cam bolts (A) into cam bolt holes on top board (1).
2. Attach magnet (D) to top board (1) by inserting 2 screws (E) through holes on magnet (D)
and tighten to top board (1).
3. Attach metal brackets (F) to top board (1) by inserting 2 screws (T) through holes on metal
brackets (F) and tighten to top board (1).
4. Screw 4 cam bolts (A) into cam bolt holes on middle board (8).
STEP 2
1. Screw 2 cam bolts (A) into cam bolt holes on upper left side panel (2).
2. Screw 2 cam bolts (A) into cam bolt holes on upper right side panel (3).
STEP 3
1. Attach magnet plate (J) to left door (5) by inserting 1 screw (G) through hole on magnet plate
(J) and tighten to left door (5).
2. Attach knob (M) to left door (5) by inserting 1 screw (L) through hole on left door (5) and
tighten to knob (M).
3. Insert 2 door pins (K) into holes on left door (5).
4. Repeat above steps for right door (6).