Installation Guide

ManualsBrandsRiverRidge Home ManualsBathMedford Collection 23.56 in. W x 7.75 in. D x 61.44 in. H 2-Door Space Saver in in White

ASSEMBLY INSTRUCTIONS

RiverRidge

Medford Spacesaver

ITEM #: 06-104 White

ADULT ASSEMBLY REQUIRED

This product requires assembly by an adult because of small parts. Care should be taken

in unpacking and assembling this item to keep small parts away from children. During assembly

children should be kept away from the product due to possible risk of injury.

WARNING SEE FULL WARNING ON PAGE 2

Young children can be seriously injured or killed if furniture tips over. Don’t use

this item for a TV stand or place heavy objects on top of item. Always use

angle-braces or anchors to secure furniture to the wall.

Summary of content (11 pages)

PAGE 1
ASSEMBLY INSTRUCTIONS RiverRidge® Medford Spacesaver ITEM #: 06-104 White ADULT ASSEMBLY REQUIRED This product requires assembly by an adult because of small parts. Care should be taken in unpacking and assembling this item to keep small parts away from children. During assembly children should be kept away from the product due to possible risk of injury. WARNING SEE FULL WARNING ON PAGE 2 Young children can be seriously injured or killed if furniture tips over.
PAGE 2
THIS SHELF UNIT WILL HOLD UP TO 25 POUNDS PER SHELF OR A TOTAL OF 75 POUNDS. DO NOT LOAD EACH SHELF WITH MORE THAN 25 POUNDS OR 75 POUNDS TOTAL WEIGHT. IF OVERLOADED WITH MORE THAN 25 POUNDS PER SHELF OR 75 POUNDS TOTAL WEIGHT, SHELF MAY FALL FROM THE WALL AND CAUSE SERIOUS INJURY OR DEATH.
PAGE 3
PARTS LIST NO QTY DESCRIPTION 1 1PC Top Board 2 1PC Upper Left Side Panel 3 1PC Upper Right Side Panel 4 1PC Adjustable Shelf 5 1PC Left Door 6 1PC Right Door 7 1PC Bottom Shelf 8 1PC Middle Board 9 1PC Lower Left Side Panel 10 1PC Lower Right Side Panel 11 3PCS Cross Bar 12 1PC Upper Back Board 13 1PC Lower Back Board 14 1PC Plastic Connection Strip 15 1PC Upper Back Board
PAGE 4
NO PARTS QTY DESCRIPTION A B C D 12PCS Cam Bolt 12PCS Cam Lock 8PCS Wood Dowel 1PC Magnet E 10PCS Screw (3x14mm) F G H I J K L 2PCS Adjustable Anchor Bracket 2PCS Screw (3x10mm) 4PCS Shelf Holder 4PCS Screw (4x35mm) 2PCS Magnet Plate 4PCS Door Pin 2PCS Screw (4x25mm) M 2PCS Knob N O P Q R S 6PCS Plastic Nut 6PCS Screw (5x35mm) 6PCS Plastic Cap 2PCS Plastic Anchor 2PCS Screw (4x30mm) 8PCS Plastic Bracket T 2PCS Screw (4x12mm) TOOLS NEEDED FOR ASSEMBLY: FLAT &
PAGE 5
STEP 1 1. 2. 3. 4. Screw 4 cam bolts (A) into cam bolt holes on top board (1). Attach magnet (D) to top board (1) by inserting 2 screws (E) through holes on magnet (D) and tighten to top board (1). Attach metal brackets (F) to top board (1) by inserting 2 screws (T) through holes on metal brackets (F) and tighten to top board (1). Screw 4 cam bolts (A) into cam bolt holes on middle board (8). STEP 2 1. 2. Screw 2 cam bolts (A) into cam bolt holes on upper left side panel (2).
PAGE 6
STEP 4 1. 2. 3. 4. Attach upper left side panel (2) to bottom shelf (7) by inserting cam bolts (A) into cam lock holes on bottom shelf (7). Insert 2 cam locks (B) into cam lock holes on bottom shelf (7) and rotate clockwise to secure cam bolts in place. Attach upper right side panel (3) to bottom shelf (7) by inserting cam bolts (A) into cam lock holes on bottom shelf (7). Insert 2 cam locks (B) into cam lock holes on bottom shelf (7) and rotate clockwise to secure cam bolts in place. STEP 5 1. 2. 3. 4.
PAGE 7
STEP 6 1. 2. 3. Attach left door (5) and right door (6) to bottom shelf (7) by inserting door pins (K) into door pin holes on bottom shelf (7). Attach top board (1) to upper left side panel (2), upper right side panel (3), left door (5) and right door (6) by inserting door pins (K) into door pin holes on top board (1) and inserting cam bolts (A) into cam lock holes on upper left side panel (2) and upper right side panel (3).
PAGE 8
STEP 8 1. 2. Attach pre-assembled upper unit to pre-assembled lower unit by inserting cam bolts (A) into cam lock holes on lower left side panel (9) and lower right side panel (10) and inserting 4 cam locks (B) into cam lock holes and rotating clockwise to secure cam bolts in place. Press 6 plastic caps (P) into holes on lower left side panel (9) and lower right side panel (10). STEP 9 1.
PAGE 9
STEP 10 1. Place adjustable shelf (4) onto shelf holders (H). STEP 11 1. Attach 8 plastic brackets (S) to back of cabinet by inserting 8 screws (E) through holes on plastic brackets (S) and tighten to cabinet.
PAGE 10
STEP 12 Option #1: Securing to Drywall 1. Position spacesaver against wall in desired location. Using a pencil, make 2 small marks on wall through holes on brackets (F). Move cabinet away from wall and screw 2 plastic anchors (Q) into wall on pencil marks. 2. Place cabinet against wall, insert 2 screws (R) through holes on metal brackets (F), then tighten to plastic anchors (Q). Option #2: Securing to Drywall and Wood Stud 1. Position spacesaver against wall in desired location.
PAGE 11
Enjoy your new RiverRidge® Spacesaver! Thank you for purchasing this RiverRidge® Home item. We hope you enjoy it and consider purchasing other RiverRidge® items. To order replacement parts at no cost to you, email customer.service@ssi-rr.com, call 1-(844)-223-5201 or order parts online at www.riverridgehome.com. Only valid in the United States. If purchased outside of the United States, please contact retailer where purchased. RiverRidge® is a registered trademark of Sourcing Solutions, Inc.