Installation Guide

STEP 5

1. Insert 2 wood dowels (C) into wood dowel holes on cross bar (4) and bottom board (8).

2. Attach right side panel (3) to cross bar (4) and bottom board (8) by inserting wood dowels (C) into wood

dowel holes on right side panel (3).

3. Insert 3 cam locks (B) into cam lock holes on cross bar (4) and bottom board (8), then rotate clockwise

to secure cam bolts in place.

STEP 6

1. Slide back board (5) into grooves on left side panel (2), right side panel (3) and bottom board (8).

2. Attach top board (1) to left side panel (2), right side panel (3) and back board (5) by aligning groove on

top board (1) with back board (5) and inserting cam bolts (A) into cam lock holes on left side panel (2)

and right side panel (3).

3. Insert 4 cam locks (B) into cam lock holes on left side panel (2) and right side panel (3), then rotate

clockwise to secure cam bolts in place.