Installation Guide

STEP 3

1. Attach magnet (D) to cross bar (4) by inserting 2 screws (E) through holes on magnet (D) and tighten to

cross bar (4).

2. Insert 2 wood dowels (C) into wood dowel holes on left side panel (2).

3. Attach cross bar (4) and bottom board (8) to left side panel (2) by inserting wood dowels (C) into wood

dowel holes on cross bar (4) and bottom board (8).

4. Insert 3 cam locks (B) into cam lock holes on cross bar (4) and bottom board (8), then rotate clockwise

to secure cam bolts in place.

STEP 4

1. Attach door (6) to cross bar (4) and bottom board (8) by inserting door pin (K) into door pin holes on

cross bar (4) and bottom board (8).