ASSEMBLY INSTRUCTIONS RiverRidge® Ladder Spacesaver ITEM#: 06-098 White ITEM#: 06-099 Gray ADULT ASSEMBLY REQUIRED This product requires assembly by an adult because of small parts. Care should be taken in unpacking and assembling this item to keep small parts away from children. During assembly children should be kept away from the product due to possible risk of injury. WARNING SEE FULL WARNING ON PAGE 2 Young children can be seriously injured or killed if furniture tips over.
THIS SHELF UNIT WILL HOLD UP TO 20 POUNDS PER SHELF OR A TOTAL OF 60 POUNDS. DO NOT LOAD EACH SHELF WITH MORE THAN 20 POUNDS OR 60 POUNDS TOTAL WEIGHT. IF OVERLOADED WITH MORE THAN 20 POUNDS PER SHELF OR 60 POUNDS TOTAL WEIGHT, SHELF MAY TIP FROM WALL AND CAUSE SERIOUS INJURY OR DEATH.
PARTS LIST NO QTY DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 1PC 1PC 1PC 1PC 1PC 1PC 1PC 1PC 1PC 3PCS 1PC 1PC 1PC Top Shelf Left Rail Board Top Shelf Right Rail Board Middle Shelf Left Rail Board Middle Shelf Right Rail Board Bottom Shelf Left Rail Board Bottom Shelf Right Rail Board Top Shelf Middle Shelf Bottom Shelf Rear Rail Board Bottom Rear Cross Bar Upper Right Side Frame Upper Left Side Frame 14 1PC 15 1PC Bottom Right Side Frame Bottom Left Side Frame
PARTS LIST NO PARTS QTY DESCRIPTION A 16PCS Wood Dowel B 8PCS Screw (4x45mm) C 12PCS Machine Screw (6x20mm) D 27PCS Screw (3.5x25mm) E 1PC Screw (4x30mm) F 1PC Screw (4x8mm) G 1PC Plastic Anchor H 1PC Adjustable Anchor Bracket TOOLS NEEDED FOR ASSEMBLY: FLAT & PHILLIPS SCREWDRIVER (NOT INCLUDED) THE USE OF A POWER SCREWDRIVER IS NOT RECOMMENDED FOR ASSEMBLY DO NOT USE ITEM IF ANY PARTS ARE MISSING OR DAMAGED To order replacement parts at no cost to you, email customer.
STEP 1 1. Insert 1 screw (D) through hole on top shelf left rail board (1) and tighten to rear rail board (10). 2. Repeat above step to assemble top shelf right rail board (2) to rear rail board (10). STEP 2 1. Insert 1 screw (D) through hole on middle shelf left rail board (3) and tighten to rear rail board (10). 2. Repeat above step to assemble middle shelf right rail board (4) to rear rail board (10).
STEP 3 1. Insert 1 screw (D) through hole on bottom shelf left rail board (5) and tighten to rear rail board (10). 2. Repeat above step to assemble bottom shelf right rail board (6) to rear rail board (10). STEP 4 1. Insert 4 wood dowels (A) into wood dowel holes on top shelf (7). 2. Attach top shelf (7) to pre-assembled rail boards (1, 2, 10) by inserting wood dowels (A) into wood dowel holes on rail boards (1, 2, 10). 3.
STEP 5 1. Insert 4 wood dowels (A) into wood dowel holes on middle shelf (8). 2. Attach middle shelf (8) to pre-assembled middle shelf rail boards (3, 4, 10) by inserting wood dowels (A) into wood dowel holes on middle shelf rail boards (3, 4, 10). 3. Insert 7 screws (D) through holes on middle shelf (8) and tighten to middle shelf rail boards (3, 4, 10). STEP 6 1. Insert 4 wood dowels (A) into wood dowel holes on bottom shelf (9). 2.
STEP 7 1. Insert 2 wood dowels (A) into wood dowel holes on upper left side frame (13). 2. Attach upper left side frame (13) to bottom left side frame (15) by inserting wood dowels (A) into wood dowel holes on bottom left side frame (15). 3. Insert 2 screws (B) through holes on bottom left side frame (15) and tighten to upper left side frame (13). 4. Repeat above steps to assemble upper right side frame (12) to bottom right side frame (14). STEP 8 1.
STEP 9 11 1. Attach pre-assembled shelves and rail boards to upper left side frame (13) by inserting 2 machine screws (C) through holes on each left rail board (1, 3, 5) and tighten to upper left side frame (13). 2. Attach bottom rear cross bar (11) to bottom left side frame (15) by inserting 2 screws (B) through holes on bottom left side frame (15) and tighten to bottom rear cross bar (11). STEP 10 Option #1: Securing to Drywall 1. Position spacesaver against wall in desired location.
ATTENTION ADULTS: Cabinet should be checked periodically for damage or loose screws/parts. Take appropriate action necessary to correct hazards such as tightening of screws and taking any damaged parts away from children. WARNING Please make sure your item is secured to the wall, per assembly instructions. CARE INSTRUCTIONS: Wipe clean with a water dampened cloth. Wipe dry with clean cloth. IMPORTANT: Keep assembly instructions for future reference.
Enjoy your new RiverRidge® Spacesaver! Thank you for purchasing this RiverRidge® Home item. We hope you enjoy it and consider purchasing other RiverRidge® items. To order replacement parts at no cost to you,email customer.service@ssi-rr.com, call 1-(844)-223-5201 or order parts online at www.riverridgehome.com. Only valid in the United States. If purchased outside of the United States, please contact retailer where purchased. RiverRidge ® is a registered trademark of Sourcing Solutions, Inc.
