Installation Guide

STEP 9
1. Attach front middle cross bar (10) and rear middle cross bar (11) to bottom left side panel (4)
and bottom right side panel (5) by inserting wood dowels (A) into wood dowel holes on
bottom left side panel (4) and bottom right side panel (5).
2. Insert 4 machine screws (F) though holes on bottom left side panel (4) and bottom right side
panel (5) then tighten to the metal nuts (G) using Allen wrench (I).
STEP 10
1. Attach upper assembled unit to lower assembled unit by inserting wood dowels (A) into
wood dowel holes on middle connection board (9).
2. Insert 4 screws (D) through holes on bottom left side panel (4) and bottom right side
panel (5) and tighten to middle connection board (9).