Installation Guide

STEP 3
1. Attach 2 adjustable anchor brackets (T) to top board (1) by inserting 2 screws (U) through
holes on adjustable anchor brackets (T), then tighten to top board (1).
2. Screw 2 cam bolts (B) into cam bolt holes on top board (1).
3. Attach magnet (J) to top board (1) by inserting 2 screws (H) through holes on magnet (J)
and tighten to top board (1).
4. Insert 4 wood dowels (A) into dowel holes on end of fixed shelf (8).
STEP 4
1. Insert 2 wood dowels (A) into dowel holes on end of front middle cross bar (10) and rear
middle cross bar (11).
2. Insert 2 metal nuts (G) into holes on front middle cross bar (10) and rear middle cross
bar (11).