Installation Guide

ManualsBrandsRiverRidge Home ManualsBathAshland 27.44 in. W x 64.88 in. H Space Saver in Gray

ASSEMBLY INSTRUCTIONS

RiverRidge

Ashland Spacesaver

ITEM #: 06-090 White

ITEM #: 06-091 Gray

ADULT ASSEMBLY REQUIRED

This product requires assembly by an adult because of small parts. Care should be taken

in unpacking and assembling this item to keep small parts away from children. During assembly

children should be kept away from the product due to possible risk of injury.

WARNING SEE FULL WARNING ON PAGE 2

Young children can be seriously injured or killed if furniture tips over. Don’t use

this item for a TV stand or place heavy objects on top of item. Always use

angle-braces or anchors to secure furniture to the wall.

Summary of content (12 pages)

PAGE 1
ASSEMBLY INSTRUCTIONS RiverRidge® Ashland Spacesaver ITEM #: 06-090 ITEM #: 06-091 White Gray ADULT ASSEMBLY REQUIRED This product requires assembly by an adult because of small parts. Care should be taken in unpacking and assembling this item to keep small parts away from children. During assembly children should be kept away from the product due to possible risk of injury. WARNING SEE FULL WARNING ON PAGE 2 Young children can be seriously injured or killed if furniture tips over.
PAGE 2
THIS SHELF UNIT WILL HOLD UP TO 20 POUNDS PER SHELF OR A TOTAL OF 60 POUNDS. DO NOT LOAD EACH SHELF WITH MORE THAN 20 POUNDS. IF LOADED WITH MORE THAN 20 POUNDS PER SHELF AS THIS MAY CAUSE DAMAGE TO THE SHELF AND MAY CAUSE SERIOUS INJURY OR DEATH.
PAGE 3
PARTS LIST NO QTY DESCRIPTION 1 2 3 4 5 7 8 9 10 11 12 13 14 15 16 17 1PC 1PC 1PC 1PC 1PC 1PC 1PC 1PC 1PC 1PC 1PC 1PC 1PC 1PC 1PC 1PC Top Board Top Left Side Panel Top Right Side Panel Bottom Left Side Panel Bottom Right Side Panel Adjustable Shelf Fixed Shelf Middle Connection Board Front Middle Cross Bar Rear Middle Cross Bar Rear Bottom Cross Bar Upper Back Board Middle Back Board Lower Back Board Left Door Right Door
PAGE 4
NO A B C D E F G H I J K L M N O P Q R S T U PART QTY DESCRIPTION 18PCS Wood Dowel 4PCS Cam Bolt 4PCS Cam Lock 6PCS Screw (4x40mm) 4PCS Screw (4x50mm) 4PCS Machine Screw (6x65mm) 4PCS Metal Nut 2PCS Screw (3x14mm) 1PC Allen Wrench 1PC Magnet 2PCS Magnet Plate 18PCS Screw (3x10mm) 4PCS Metal Hinge 2PCS Machine Screw (4x15mm) 2PCS Knob 4PCS Shelf Holder 2PCS Plastic Anchor 1PC Plastic Connection Strip 2PCS Screw (4x30mm) 2PCS Adjustable Anchor Bracket 2PCS Screw (4
PAGE 5
STEP 1 1. Screw 1 cam bolt (B) into cam bolt hole on top left side panel (2). 2. Insert 4 wood dowels (A) into dowel holes on end of top left side panel (2). 3. Repeat above steps for top right side panel (3). STEP 2 1. Insert 2 wood dowels (A) into dowel holes on bottom left side panel (4) and bottom right side panel (5).
PAGE 6
STEP 3 1. Attach 2 adjustable anchor brackets (T) to top board (1) by inserting 2 screws (U) through holes on adjustable anchor brackets (T), then tighten to top board (1). 2. Screw 2 cam bolts (B) into cam bolt holes on top board (1). 3. Attach magnet (J) to top board (1) by inserting 2 screws (H) through holes on magnet (J) and tighten to top board (1). 4. Insert 4 wood dowels (A) into dowel holes on end of fixed shelf (8). STEP 4 1.
PAGE 7
STEP 5 1. 2. 3. 4. Attach magnet plate (K) to left door (16) by inserting 1 screw (L) through hole on magnet plate (K) and tighten to left door (16). Attach 2 metal hinges (M) to left door (16) by inserting 4 screws (L) through holes on metal hinges (M) and tighten to left door (16). Attach knob (O) to left door (16) by inserting 1 machine screw (N) through hole on left door (16) and tighten to knob (O). Repeat above steps for right door (17). STEP 6 1. 2.
PAGE 8
STEP 7 1. 2. 3. Slide lower back board (15) into grooves on top left side panel (2), top right side panel (3) and fixed shelf (8). Attach middle connection board (9) to top left side panel (2), top right side panel (3) and lower back board (15) by inserting lower back board (15) into groove on middle connection board (9) and wood dowels into wood dowel holes on middle connection board (9).
PAGE 9
STEP 9 1. Attach front middle cross bar (10) and rear middle cross bar (11) to bottom left side panel (4) and bottom right side panel (5) by inserting wood dowels (A) into wood dowel holes on bottom left side panel (4) and bottom right side panel (5). 2. Insert 4 machine screws (F) though holes on bottom left side panel (4) and bottom right side panel (5) then tighten to the metal nuts (G) using Allen wrench (I). STEP 10 1.
PAGE 10
STEP 11 1. Attach rear bottom cross bar (12) to bottom left side panel (4) and bottom right side panel (5) by inserting 4 screws (E) through holes on bottom left side panel (4) and bottom right side panel (5) and tighten to rear bottom cross bar (12). 2. Attach left door (16) to top left side panel (2) by inserting 4 screws (L) through holes on metal hinges (M) and tighten to top left side panel (2). 3.
PAGE 11
STEP 13 Option #1: Securing to Drywall 1. Position spacesaver against wall in desired location. Using a pencil, make 2 small marks on wall through holes on anchor brackets (T). Move cabinet away from wall and screw 2 plastic anchors (Q) into wall on pencil marks. 2. Place cabinet against wall, insert 2 screws (S) through holes on anchor brackets (T), then tighten to plastic anchors (Q). Option #2: Securing to Drywall and Wood Stud 1. Position spacesaver against wall in desired location.
PAGE 12
Enjoy your new RiverRidge® Spacesaver! Thank you for purchasing this RiverRidge® Home item. We hope you enjoy it and consider purchasing other RiverRidge® items. To order replacement parts at no cost to you, email customer.service@ssi-rr.com, call 1-(844)-223-5201 or order parts online at www.riverridgehome.com. Only valid in the United States. If purchased outside of the United States, please contact retailer where purchased. RiverRidge® is a registered trademark of Sourcing Solutions, Inc.