Installation Guide

STEP 3
1. Screw 2 cam bolts (B) into pre-threaded holes on top board (1).
2. Attach magnet (J) to top board (1) by inserting 2 screws (H) through holes on magnet (J) and tighten
to top board (1).
3. Insert 4 wood dowels (A) into dowel holes on end of fixed shelf (8).
STEP 4
1. Insert 4 wood dowels (A) into dowel holes on rear top cross bar (6).
2. Insert 2 wood dowels (A) into dowel holes on end of front middle cross bar (10) and rear middle
cross bar (11).
3. Insert 2 metal nuts (G) into holes on front middle cross bar (10) and rear middle cross bar (11).