Installation Guide

STEP 11
1. Attach rear bottom cross bar (12) to bottom left side panel (4) and bottom right side panel (5)
by inserting 4 wood screws (E) through holes on bottom left side panel (4) and bottom right
side panel (5) and tighten to rear bottom cross bar (12).
2. Attach left door (16) to top left side panel (2) by inserting 4 screws (L) through holes on metal
hinges (M) and tighten to top left side panel (2).
3. Attach right door (17) to top right side panel (3) by inserting 4 screws (L) through holes on
metal hinges (M) and tighten to top right side panel (3).
STEP 12
1. Insert 4 plastic holders (P) into holes on top left side panel (2) and top right side panel (3).
2. Place adjustable shelf (7) onto plastic holders (P).
3. Drill holes on wall through hole position on drawing and insert 2 plastic anchors (Q) into holes
on wall.
4. Align spacesaver in place with holes and insert 2 screws (E) through holes on rear top cross bar (6)
and tighten to secure spacesaver to wall.