ASSEMBLY INSTRUCTIONS RiverRidge® Ashland Spacesaver ITEM #:06-090 White ITEM #:06-091 Gray ADULT ASSEMBLY REQUIRED This product requires assembly by an adult because of small parts. Care should be taken in unpacking and assembling this item to keep small parts away from children. WARNING SEE FULL WARNING ON PAGE 2 Young children can be seriously injured or killed if furniture tips over. Don’t use this item for a TV stand or place heavy objects on top of item.
THIS SHELF UNIT WILL HOLD UP TO 20 POUNDS PER SHELF OR A TOTAL OF 60 POUNDS. DO NOT LOAD EACH SHELF WITH MORE THAN 20 POUNDS. IF LOADED WITH MORE THAN 20 POUNDS PER SHELF AS THIS MAY CAUSE DAMAGE TO THE SHELF AND MAY CAUSE SERIOUS INJURY OR DEATH.
PARTS LIST NO QTY DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 1PC 1PC 1PC 1PC 1PC 1PC 1PC 1PC 1PC 1PC 1PC 1PC 1PC 1PC 1PC 1PC 1PC Top board Top left side panel Top right side panel Bottom left side panel Bottom right side panel Rear top cross bar Adjustable shelf Fixed shelf Middle connection board Front middle cross bar Rear middle cross bar Rear bottom cross bar Back board Back board Back board Left door Right door
NO A B C D E F G H I J K L M N O P Q R PART QTY DESCRIPTION 22PCS Wood dowel 4PCS Cam bolt 4PCS Cam lock 6PCS Wood screw (4 x 40mm) 6PCS Wood screw (4 x 50mm) 4PCS Machine screw (6x 65mm) 4PCS Metal nut 2PCS Screw (3 x 14mm) 1PC Allen wrench 1PC Magnet 2PCS Magnet plate 18PCS Screw (3 x 10mm) 4PCS Metal hinge 2PCS Machine screw (4 x 15mm) 2PCS Knob 4PCS Plastic holder 2PCS Plastic anchor 1PC Plastic clip TOOLS NEEDED FOR ASSEMBLY: FLAT & PHILLIPS SCREWDRIVER (NOT INC
STEP 1 1. Screw 1 cam bolt (B) into pre-threaded hole on top left side panel (2). 2. Insert 4 wood dowels (A) into dowel holes on end of top left side panel (2). 3. Repeat above steps for top right side panel (3). STEP 2 1. Insert 2 wood dowels (A) into dowel holes on bottom left side panel (4) and bottom right side panel (5).
STEP 3 1. Screw 2 cam bolts (B) into pre-threaded holes on top board (1). 2. Attach magnet (J) to top board (1) by inserting 2 screws (H) through holes on magnet (J) and tighten to top board (1). 3. Insert 4 wood dowels (A) into dowel holes on end of fixed shelf (8). STEP 4 1. Insert 4 wood dowels (A) into dowel holes on rear top cross bar (6). 2. Insert 2 wood dowels (A) into dowel holes on end of front middle cross bar (10) and rear middle cross bar (11). 3.
STEP 5 1. Attach magnet plate (K) to left door (16) by inserting 1 screw (L) through hole on magnet plate (K) and tighten to left door (16). 2. Attach 2 metal hinges (M) to left door (16) by inserting 4 screw (L) through hole on metal hinges (M) and tighten to left door (16). 3. Attach knob (O) to left door (16) by inserting 1 machine screw (N) through hole on left door (16) and tighten to knob (O). 4. Repeat above steps for right door (17). STEP 6 1.
STEP 7 1. Slide back board (15) into grooves on top left side panel (2), top right side panel (3) and fixed shelf (8). 2. Attach middle connection board (9) to top left side panel (2), top right side panel (3) and back board (15) by inserting back board (15) into groove on middle connection board (9) and wood dowels into wood dowel holes on middle connection board (9). 3.
STEP 9 1. Attach front middle cross bar (10) and rear middle cross bar (11) to bottom left side panel (4) and bottom right side panel (5) by inserting wood dowels (A) into wood dowel holes on bottom left side panel (4) and bottom right side panel (5). 2. Insert 4 machine screws (F) though the holes on the bottom left side panel (4) and bottom right side panel (5) then tighten to the metal nuts (G) using allen wrench (I). STEP 10 1.
STEP 11 1. Attach rear bottom cross bar (12) to bottom left side panel (4) and bottom right side panel (5) by inserting 4 wood screws (E) through holes on bottom left side panel (4) and bottom right side panel (5) and tighten to rear bottom cross bar (12). 2. Attach left door (16) to top left side panel (2) by inserting 4 screws (L) through holes on metal hinges (M) and tighten to top left side panel (2). 3.
Enjoy your new RiverRidge® Spacesaver! Thank you for purchasing this RiverRidge® Home item. We hope you enjoy it and consider purchasing other RiverRidge® items. To order replacement parts at no cost to you, email customer.service@ssi-rr.com, call 1-(844)-223-5201 or order parts online at www.riverridgehome.com RiverRidge® is a registered trademark of Sourcing Solutions, Inc.
