Installation Guide

STEP 9
1. Attach front middle cross bar (10) and rear middle cross bar (11) to bottom left side panel (4)
and bottom right side panel (5) by inserting wood dowels (A) into wood dowel holes on bottom
left side panel (4) and bottom right side panel (5).
2. Insert 4 machine screws (F) though the holes on the bottom left side panel (4) and bottom right
side panel (5) then tighten to the metal nuts (G) using allen wrench (I).
STEP 10
1. Attach upper assembled unit to lower assembled unit by inserting wood dowels (A) into wood
dowel holes on middle connection board (9).
2. Insert 4 screws (D) through holes on bottom left side panel (4) and bottom right side panel
(5) and tighten to middle connection board (9).