Installation Guide

STEP 9
1.
Attach metal hinges (I) to right side panel (3) by inserting 4 wood screws (D) through holes on
metal hinges (I) then tighten to right side panel (3).
2.
Insert 4 plastic holders (O) into holes on middle panel (14) and right side panel (3). All 4 plastic
holders (O) should be at the same height.
3.
Put shelf (15) onto plastic holders (O).
STEP 10
1.
Slide 3 drawers into pre-assembled drawer holders.
2.
Insert 6 drawer plastic stoppers (H) to prevent drawers from pulling out.