Installation Guide
STEP 3
1.
Attach magnet (M) to middle panel (14) by inserting 2 screws (N) through holes on magnet (M)
then tighten to middle panel (14).
2.
Attach top shelf (4) to middle panel (14) by inserting cam bolts (A) into cam lock holes on top shelf
(4), then insert 2 cam locks (B) into the cam lock holes on top shelf (4), rotate clockwise to secure
cam bolts (A) in place.
3.
Attach bottom board (5) to middle panel (14) by inserting cam bolts (A) into cam lock holes on
middle panel (14), then insert 2 cam locks (B) into the cam lock holes on middle panel (14), rotate
clockwise to secure cam bolts (A) in place.
4.
Insert 1 wood dowel (C) into wood dowel hole on bottom board (5).
5.
Attach decorative panel (6) to bottom board (5) by inserting the wood dowel (C) into wood dowel
hole on decorative panel (6).
STEP 4
1.
Insert 2 wood dowels (C) into wood dowel holes on right side panel (3).
2.
Attach right side panel (3) to bottom board (5) and decorative panel (6) by inserting cam bolts (A)
into cam lock holes on bottom board (5) and inserting wood dowels (C) into wood dowel holes
on decorative panel (6).
3.
Insert 2 cam locks (B) into cam lock holes on bottom board (5), then rotate clockwise to secure
cam bolts (A) in place.
4.
Insert 2 wood dowels (C) into wood dowel holes on left side panel (2).
5.
Attach left side panel (2) to bottom board (5), decorative panel (6) and top shelf (4) by inserting
cam bolts (A) into cam lock holes on bottom board (5) and top shelf (4) and inserting wood
dowels (C) into wood dowel holes on decorative panel (6).
6.
Insert 4 cam locks (B) into cam lock holes on bottom board (5) and top shelf (4), then rotate
clockwise to secure cam bolts (A) in place.