Installation Guide

STEP 1
1.
Screw 2 cam bolts (A) into pre-threaded holes on right side panel (3).
2.
Screw 4 cam bolts (A) into pre-threaded holes on left side panel (2).
3.
Attach 1 drawer holder (E) to left side panel (2) by inserting 2 wood screws (D) through holes on
drawer holder (E) then tighten to left side panel (2).
4.
Repeat step 3 above to assemble another 2 drawer holders (E) to left side panel (2).
STEP 2
1.
Screw 2 cam bolts (A) into pre-threaded holes on bottom board (5).
2.
Screw 2 cam bolts (A) into pre-threaded holes on middle panel (14).
3.
Attach 1 drawer holder (E) to middle panel (14) by inserting 2 wood screws (D) through holes on
drawer holder (E) then tighten to middle panel (14).
4.
Repeat step 3 above to assemble another 2 drawer holders (E) to middle panel (14).