Installation Guide

STEP 10
1. Attach magnet plate (L) to door (9) by inserting 2 wood screws (D) through holes on magnet plate
(L) then tighten to door (9).
2. Attach 2 metal hinges (I) to door (9) by inserting 4 wood screws (D) through holes on metal hinges
(I) then tighten to door (9).
3. Attach knob (J) to door (9) by inserting 1 machine screw (K) through hole on door (9) then tighten
to knob (J).
4. Attach metal hinges (I) to lower right side panel (3) by inserting 4 wood screws (D) through holes
on metal hinges (I) then tighten to lower right side panel (3).
5. Insert 4 plastic holders (O) into holes on lower left side panel (2) and lower right side panel (3). All
4 plastic holders (O) should be at the same height.
6. Place shelf (6) onto plastic holders (O).