Instructions / Assembly

STEP 8

1. Screw in 4pc cam bolt (B) into the pre-threaded holes on the middle connection board (8).

STEP 9

1. Attach the upper assembled section to lower assembled section by insert 4 cam bolt (B) into the cam lock

holes on the

upper left side panel (4) and upper right side panel (3).

2. Insert 4pc cam locks (C) into the cam lock holes on the upper left side panel (4) and upper right side panel (3),

then rotate

clockwise to secure the cam bolt (B) in place by using a Philips Screwdriver.