Installation Guide

STEP 8

1. Screw 4 cam bolts (small-B) into pre-threaded holes on middle connection board (8).

STEP 9

1. Attach upper assembled section to lower assembled section by inserting 4 wood dowels (A) into dowel holes

and inserting cam bolts (small-B) into cam lock holes on upper left side panel (4) and upper right side panel

(3).

2. Insert 4 cam locks (small-C) into cam lock holes on upper left side panel (4) and upper right side panel (3) and

rotate clockwise to secure cam bolts (small-B) in place.