Installation Guide

STEP 3
1. Attach right support board (13) to upper right side panel (3) by inserting wood dowels
(A) into dowel holes and inserting cam bolts (B) into cam lock holes on upper right side
panel (3).
2. Insert 3 cam locks (C) into cam lock holes on upper right side panel (3), then rotate
clockwise to secure cam bolts (B) in place.
3. Repeat above steps to assemble upper left side panel (4) and right support board (14).
STEP 4
1. Screw 2 cam bolts (B) into cam bolt holes on upper left side panel (4) and upper right side
panel (3).
2. Insert 4 wood dowels (A) into dowel holes on upper left side panel (4) and upper right side
panel (3).
3. Attach shelf (6) to upper left side panel (4) by inserting cam bolt (B) and wood dowels (A)
into holes on shelf (6), then insert 1 cam lock (C) into cam lock hole on shelf (6) and rotate
clockwise to secure cam bolt (B) in place.
4. Attach upper right side panel (3) to shelf (6) by inserting cam bolt (B) and 2 wood dowels
(A) into holes on shelf (6).
5. Insert 1 cam lock (C) into cam lock hole on shelf (6), then rotate clockwise to secure cam
bolt (B) in place.