Installation Guide

STEP 10
1. Attach upper back board (9) and middle back board (10) together by sliding into plastic
connection strip (N).
2. Attach upper back board (9) and middle back board (10) to cabinet by inserting 8 screws
(G) through holes on upper back board (9), and 4 screws (G) through holes on middle
back board (10), then tighten to cabinet.
3. Attach lower back board (11) to cabinet by inserting 8 screws (G) through holes on lower
back board (11), then tighten to cabinet.
4. Insert 4 screws (G) through holes on joint area of middle back board (10) and lower back
board (11), then tighten to cabinet.
STEP 11
1. Attach left door (1) to left side panel (4) by inserting 4 screws (D) through holes on hinges (E),
then tighten to left door (1).
2. Repeat above step to assemble right door (2).