Instructions / Assembly

STEP3

1. Put the assembled drawer upside down.

2. Attach the drawer slides attach to drawer (W) to drawer right side panel (11) by inserting 2 wood screws

(L) through holes on the drawer slides attach to drawer (W), then tighten into drawer right side panel (11)

by using a Philips screwdriver.

3. Attach the drawer slides attach to drawer (W) to drawer left side panel (12) by inserting 2 wood screws (L)

through holes on the drawer slides attach to drawer (W), then tighten into drawer left side panel (12) by

using a Philips screwdriver.

STEP4

STEP4.

1. Screw in 3 cam bolts (B) into the pre-threaded holes on the left support board (6).

2. Insert 3 wood dowels (A) into the dowel holes on the left support board (6).

3. Attach left support panel (6) to left side panel (1) by inserting the wood dowels (A) into the dowel holes

and inserting the cam bolts (B) into the cam lock holes on the left side panel (1).

4. Insert 3 cam locks (C) into the cam lock holes on the left side panel (1), then rotate clockwise to secure

the cam bolts (B) in place.