Instructions / Assembly

STEP1

1. Attached drawer left side panel (12) to drawer back board (14) by inserting 2pc long wood screws (M)

through holes on the left side panel (12), then tighten into drawer back board (14).

2. Attached drawer right side panel (11) to drawer back board (14) by inserting 2pc long wood screws (M)

through holes on the right side panel (11),then tighten into drawer back board (14).

3. Slide the drawer bottom board (13) into the grooves on the drawer left side panel (12), drawer right side

panel (11) and drawer back side panel (14).

STEP2

1. Screw in 2 cam bolts (B) into the pre-threaded holes on the drawer front board (10).

2. Insert 4 wood dowels (A) into dowel holes on the drawer front board (10).

3. Attached drawer front board (10) to drawer left side panel (12), drawer right side panel (11) and drawer

bottom board (13) by inserting the dowels(A) into dowel holes and inserting the cam bolt (B) into the

cam lock holes on the drawer left side panel (12), drawer right side panel (11) and inserting the drawer

bottom board (13) into the groove on the drawer front board (10).

4. Insert 2 cam locks (C) into the cam lock holes on the drawer left side panel (12) and drawer right side

panel (11) separately, then rotate clockwise to secure the cam bolts (B) in place.

5. Attach 1 handle (K) to drawer front board (10) by inserting 2 mchine screws (J) through the holes on the

drawer front board (10) then tighen to the handle (K).