Instructions / Assembly
STEP11
STEP11
1. Attach drawer to cabinet by sliding 2 drawer slider with wheels (N) into 2 drawer sliders which already
assembled to the cabinet.
2. Insert 8 shelf holders (I) into holes on left side panel (1) and right side panel (2).
3. Make sure the 8 shelf holders (I) on the same height.
4. Put the 2 shelves (9) onto the shelf holders (I).
STEP12
STEP12
1.Attach 2pc back board (8) to the pre-assembled cabinet by inserting 18 wood screws (G) through holes on back
board (8), then tighten into the cabinet.










