Installation Guide
STEP 9
A
B
B
A
2
A
B
1
A
B
1. Screw in 6 cam bolts (B) into pre-threaded holes on left side panel (1) and right side panel (2).
2. Insert 6 wood dowels (A) into dowel holes on left side panel (1) and right side panel (2).
STEP 10
1. Attach cross bar (4) to left side panel (1) by inserting wood dowel (A) and cam bolt (B) into holes on
cross bar (4), then insert 1 cam lock (C) into cam lock hole on cross bar (4) and rotate clockwise to
secure cam bolt (B) in place.
2.
Attach bottom board (5) to left side panel (1) by inserting wood dowels (A) and cam bolts (B) into
holes
on bottom board (5), then insert 2 cam locks (C) into cam lock holes on bottom board (5) and rotate
clockwise to secure cam bolts (B) in place.
3. Repeat above steps to attach right side panel (2) to cross bar (4) and bottom board (5).
4. Attach magnet (H) to cross bar (4) by inserting 2 wood screws (H) through holes on magnet (H) and
tighten to cross bar (4).










