Installation Guide

STEP 7
1. Screw in 3 cam bolts (B) into pre-threaded holes on right support board (3).
2. Insert 2 wood dowels (A) into dowel holes on right support board (3).
3. Attach right support board (3) to right side panel (2) by inserting wood dowels (A) into dowel holes and
inserting cam bolts (B) into cam lock holes on right side panel (2).
4. Insert 3 cam locks (C) into cam lock holes on right side panel (2) and rotate clockwise to secure cam bolts
(B) in place.
STEP 8
1. Attach drawer slides (V) to right side panel (2) by inserting 3 wood screws (L) through holes on drawer
slides (V) and tighten to right side panel (2).
2. Attach 2 hinges (E) to right support board (3) by inserting 6 wood screws (D) through holes on hinges (E)
and tighten to right support board (3).