Installation Guide

STEP 5

1. Screw in 3 cam bolts (B) into pre-threaded holes on left support board (6).

2. Insert 2 wood dowels (A) into dowel holes on left support board (6).

3. Attach left support board (6) to left side panel (1) by inserting wood dowels (A) into dowel holes and

inserting cam bolts (B) into cam lock holes on left side panel (1).

4. Insert 3 cam locks (C) into cam lock holes on left side panel (1) and rotate clockwise to secure cam bolts

(B) in place.

STEP 6

1. Attach drawer slides (V) to left side panel (1) by inserting 3 wood screws (L) through holes on drawer

slides (V) and tighten to left side panel (1).

2. Attach 2 hinges (E) to left support board (6) by inserting 6 wood screws (D) through holes on hinges (E)

and tighten to left support board (6).