Installation Guide

STEP 3

1. Attach drawer front board (10) to drawer left side panel (12), drawer right side panel (11) and drawer

bottom board (13) by inserting dowels (A) into dowel holes and inserting cam bolts (B) into cam lock

holes on drawer left side panel (12), drawer right side panel (11) and inserting drawer bottom board (13)

into groove on drawer front board (10).

2. Insert 2 cam locks (C) into cam lock holes on drawer left side panel (12) and drawer right side panel (11)

and rotate clockwise to secure cam bolts (B) in place.

3. Attach 1 handle (K) to drawer front board (10) by inserting 2 machine screws (J) through holes on drawer

front board (10) and tighten to handle (K).

STEP 4

1. Turn assembled drawer upside down.

2. Attach drawer slides (W) to drawer right side panel (11) by inserting 2 wood screws

(L) through holes on drawer slides (W) and tighten to drawer right side panel (11).

3. Attach drawer slides (W) to drawer left side panel (12) by inserting 2 wood screws (L) through holes on

drawer slides (W) and tighten to drawer left side panel (12).