Installation Guide

STEP 13
1. Slide 2 back board (8) into plastic connection strip (P) and attach to pre-assembled cabinet by inserting 18
wood screws (G) through holes on back boards (8) and tighten to cabinet.
STEP 14
1. Attach left door (15) to left side panel (1) by inserting 6 wood screws (D) through holes on hinges (E) and
tighten to left door (15).
2. Attach handle (K) to left door (15) by inserting 2 machine screws (J) through holes on left door (15) and
tighten to handle (K).
3. Attach 1 magnet plate (F) to left door (15) by inserting 1 wood screw (D) through the hole on magnet
plate (F) and tighten to left door (15).
4. Repeat above 3 steps to assemble right door (16) to right side panel (2) and assemble handle (K) and
magnet plate (F) to right door (16).