Installation Guide

STEP 3
1. Turn assembled drawer upside down.
2. Attach drawer slides (W) to drawer right side panel (11) by inserting 2 wood screws (L)
through holes on drawer slides (W), then tighten to drawer right side panel (11).
3. Attach drawer slides (W) to drawer left side panel (12) by inserting 2 wood screws (L)
through holes on drawer slides (W), then tighten to drawer left side panel (12).
STEP 4
1. Screw 3 cam bolts (B) into cam bolt holes on left support board (6).
2. Insert 2 wood dowels (A) into dowel holes on left support board (6).
3. Attach left support board (6) to left side panel (1) by inserting wood dowels (A) into dowel
holes and inserting cam bolts (B) into cam lock holes on left side panel (1).
4. Insert 3 cam locks (C) into cam lock holes on left side panel (1), then rotate clockwise to
secure cam bolts (B) in place.