Installation Guide

STEP 9

1. Attach cross bar (3) to left side panel (2) by inserting wood dowel (A) and cam bolt (B) into holes on cross bar

(3) and insert 1 cam lock (C) into cam lock hole on cross bar (3) and rotate clockwise to secure cam bolt (B) in

place.

2. Attach bottom board (4) to left side panel (2) by inserting wood dowels (A) and cam bolts (B) into holes on

bottom board (4) and insert 2 cam locks (C) into cam lock holes on bottom board (4) and rotate clockwise to

secure cam bolts (B) in place.

3. Repeat above steps to attach right side panel (1) to cross bar (3) and bottom board (4).

4. Attach magnet (H) to cross bar (3) by inserting 2 magnet wood screws through holes on magnet (H) and

tighten into cross bar (3).

STEP 10

1.Screw in 4 cam bolts (B) into pre-threaded holes on top board (5).