Installation Guide

STEP 7
1. Attach left support board (14) to left side panel (2) by inserting cam bolts into cam lock holes and
inserting wood dowels into dowel holes on the left side panel (2).
2. Insert 3 cam locks (C) into cam lock holes on left side panel (2) and rotate clockwise to secure cam bolts in
place.
3. Repeat above steps to assemble right side panel (1) and right support board (15).
STEP 8
1. Attach magnet plate (F) to door (7) by inserting 1 wood screw (D) through hole on magnet plate (F) and
tightening to door (7).
2. Attach handle (K) to door (7) by screwing 2 machine screws (J) through holes on door (7) and tightening to
handle (K).