Installation Guide
STEP 7
1. Insert 1 screw (R) through adjustable anchor bracket (P) into hole on top board (5).
2. Screw 4 cam bolts (B) into cam bolt holes on top board (5).
3. Insert 4 wood dowels (A) into dowel holes on top of left side panel (2) and right side
panel (1).
4. Attach top board (5) to left side panel (2) and right side panel (1) by inserting 4 wood
dowels (A) into dowel holes on top board (5), then insert 4 cam bolts (B) into holes on left
side panel (2) and right side panel (1).
5. Insert 2 cam locks (C) into cam lock holes on left side panel (2), then rotate clockwise to
secure cam bolts (B) in place.
6. Insert 2 cam locks (C) into cam lock holes on right side panel (1), then rotate clockwise to
secure cam bolts (B) in place.
STEP 8
1. Attach back board (6) to pre-assembled cabinet by inserting 13 screws (G) through holes
on back board (6), then tighten to cabinet.










