Installation Guide
STEP 6 
1.  Screw 6 cam bolts (B) into cam bolt holes on left side panel (2) and right side panel (1). 
2.  Insert 6 wood dowels (A) into dowel holes on left side panel (2) and right side panel (1). 
3.  Attach cross bar (3) to left side panel (2) by inserting wood dowel (A) and cam bolt (B) into 
holes on cross bar (3) and insert 1 cam lock (C) into cam lock hole on cross bar (3) and 
rotate clockwise to secure cam bolt (B) in place. 
4.  Attach bottom board (4) to left side panel (2) by inserting 2 wood dowels (A) and 2 cam 
bolts (B) into holes on bottom board (4), then insert 2 cam locks (C) into cam lock holes on 
bottom board (4) and rotate clockwise to secure cam bolts (B) in place. 
5.  Repeat above steps to attach right side panel (1) to cross bar (3) and bottom board (4). 
6.  Attach magnet (H) to cross bar (3) by inserting 2 magnet screws through holes on magnet 
(H), then tighten into cross bar (3). 










