Installation Guide

STEP 5
1. Attach left support board (14) to left side panel (2) by inserting cam bolts into cam lock
holes and inserting wood dowels into dowel holes on the left side panel (2).
2. Insert 3 cam locks (C) into cam lock holes on left side panel (2), then rotate clockwise to
secure cam bolts in place.
3. Attach drawer slides (T) to left side panel (2) by inserting 2 screws (S) through holes on
drawer slides (T), then tighten to left side panel (2).
4. Repeat above steps to assemble right side panel (1) and right support board (15).
5. Attach magnet plate (F) to door (7) by inserting 2 screws (D) through holes on magnet
plate (F), then tighten to door (7).
6. Attach handle (K) to door (7) by screwing 2 machine screws (J) through holes on door (7),
then tighten to handle (K).