Installation Guide
STEP 3
1. Attach drawer slides (U) to drawer right side panel (10) by inserting 2 wood screws (S)
through holes on drawer slides (U), then tighten into drawer right side panel (10).
2. Attach drawer slides (U) to drawer left side panel (9) by inserting 2 screws (S) through
holes on drawer slides (U), then tighten into drawer left side panel (9).
STEP 4
1. Insert 2 wood dowels (A) into dowel holes on left support board (14).
2. Screw 3 cam bolts (B) into cam bolt holes on left support board (14).
3. Insert 2 wood dowels (A) into dowel holes on right support board (15).
4. Screw 3 cam bolts (B) into cam bolt holes on right support board (15).
5. Attach 2 hinges (E) to left support board (14) by inserting 4 screws (D) through holes on
hinges (E), then tighten to left support board (14).










