Installation Guide

STEP 9
Option #1: Securing to Drywall
1. Position cabinet against wall in desired location. Using a pencil, make small mark on wall
through hole on bracket (P). Move cabinet away from wall and screw 1 plastic anchor (N) into
wall on pencil mark.
2. Place cabinet against wall, insert 1 screw (O) through hole on metal bracket (P), then
tighten to plastic anchor (N).
Option #2: Securing to Drywall and Wood Stud
1. Position cabinet against wall in desired location. Insert 1 screw (O) through hole on metal
bracket (P), then tighten through drywall and into wood stud.
* Tip: Anchor bracket (P) can be adjusted to correct distance from wall to cabinet as needed. Once
adjusted, be sure to re-tighten bracket inside cabinet for stability.
STEP 10
1. Place drawer into cabinet by inserting 2 drawer slides on drawer into 2 drawer slides
attached to cabinet.
2. Attach door (7) to left side panel (2) by inserting 4 screws (D) through holes on metal
hinges (E), then tighten into door (7).